What Is Gathering?
Gathering is a process that can carry out in many different ways. It can be a process of collecting a large quantity of material or a process of gathering a particular item or waistline.
Gathering a skirt and bodice
Gathering skirt and bodice is a technique of bunching fabric together evenly. This can done with skirts, as well as other garments. You can choose from a variety of fabrics for gathering such as velvet or velour. However, the best fabrics for gathering are ones that are soft, drapey, and fluid.
Gathering involves a number of steps. First, you need to divide the fabric into sections. Then, you need to place a fusible interfacing on the wrong side of the fabric. Then, you can sew the pieces together.
If you are using an invisible zipper, you should make sure to use the right size. It should be about an inch longer than the width of your finished skirt. Once you done, you can baste the garment to keep it even.
For this, you need to mark a quarter of the finished width of the fabric. You can do this by holding the piece in one hand and pulling the loose threads with the other.
Next, you will need to attach the skirt and bodice. This is easiest if you do it after sewing the side seams. Also, you will want to make sure that the waistband is pressed up half an inch. In this case, you can also use a double folded hem.
Before you stitch the pieces together, you will need to pin them. Make sure to pin along the side seams and on the bodice center. When you’re pinning, you can use a basting stitch to keep the gathers in place.
Next, you will need to backstitch. Backstitching is used at the beginning and end of the gathering. After you are done, you will remove the basting stitches, and then press your gathered skirt and bodice. This will help to keep the gathers in place and avoid them from folding down.
Gathering skirts and bodice can be a great addition to a variety of outfits. Whether you’re looking for a classic style, or you’d rather add a ruffle, this is a simple way to create a unique look. So, why not give it a try?
Safety measures in place for gas gathering pipelines
The US Department of Transportation recently adopted safety measures for gas gathering pipelines. These regulations are part of the federal government’s ongoing efforts to combat climate change. In addition to new safety requirements, the rule also requires pipeline operators to report incidents and record information about their facilities. This is necessary to assess the performance of the pipeline and ensure that the infrastructure is safe.
Gas gathering lines are pipelines that move unprocessed natural gas from a production facility to a transmission line. The pipelines are characterized by their large diameters and high operating pressures. They have a lower risk of failure compared to other pipelines. Yet their size increases the potential for adverse consequences. An incident could cause damage to people and property and disrupt gas service.
The Pipeline and Hazardous Materials Safety Administration (PHMSA) is responsible for regulating these pipelines. Historically, gas gathering lines were smaller in diameter. However, the increase in natural gas production and hydraulic fracturing have changed the landscape of the industry. As a result, these lines now operate at higher pressures and share many of the same physical characteristics as transmission lines. A rupture of a gas gathering pipeline can be catastrophic.
PHMSA is working to address gaps in the regulations that govern these lines. It has enacted several public comment periods and has received the approval of an industry-advantaged advisory committee. The agency is rewriting the Federal Pipeline Safety Regulations, which will include new regulations on gas gathering pipelines. Currently, over 450,000 miles of onshore gas gathering lines are not regulated.
The pipeline industry has fought the new rules, calling them unnecessary and unneeded. Additionally, PHMSA has delayed the final rule by a year.
There are four types of gathering pipelines. They are Type C, Type R, Type A, and Type B. Each type has its own unique safety and regulatory requirements. Compared to other lines, Type C and Type R lines are smaller in diameter and are less likely to rupture. Those types of lines will be subject to damage prevention and design standards.
PHMSA will now monitor the safety performance of all onshore gas gathering lines. All pipeline operators will be required to submit annual reports to the agency. The reports will include information on the extent of the lines, their configuration, and their safety performance.Party